Apple Carrot Condensing Unit Commercial Condensing Units R22
Product Details:
| Place of Origin: | China |
| Certification: | ISO 9001:2008, CE, CCC, QS |
| Model Number: | OBBL2-180L |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 unit |
|---|---|
| Price: | nigotiation |
| Packaging Details: | Plastic film + Plywood case |
| Delivery Time: | 20 days |
| Supply Ability: | 100 units per month |
|
Detail Information |
|||
| Compressor Brand: | , Carlyle, Danfoss, Copeland, Bock, Hanbell, Fusheng, Etc. | Cooling Type: | Fan Cooled |
|---|---|---|---|
| Refrigerant: | R404a, R22 | Voltage: | 380V/3P/50Hz, 220V/1P/60Hz |
| Use: | Cold Room, Blast Freezer, Cold Chain Logistic, Pharacy, Refrigeration | Evaporating Temperature: | 10~-15℃, -15~-35℃, -30~-50℃ |
| Condensing Temperature: | 35℃ | Compressor Type: | Screw Type |
| Highlight: | refrigeration condenser unit,danfoss condensing unit |
||
Product Description
R404a brand screw type parallel compressor racks for apple and carrot cold storage
- Because of a huge demand difference between seasons for refrigerating capacity, the unit must have a high level control for capacity, so that the unit can keep running under high efficiency mode. The average parallel unit efficiency, according to different refrigeration system is 30% higher than single compressor unit.
- Using multiple compressor parallel units can provide a multiple energy level control, the refrigeration output can be dynamically allocated more smoothly according to actual situation.
- With high efficiency oil separator, only a small amount of lubricating oil enters the system, this largely brings up the heat exchanging efficiency.
- The PLC controller monitors running compressors quantity, it maintains a maximum use rate even when only parts of the compressors are functioning.
- PLC controller can be set with the best running curve (maximum & minimum power comsuption), to same as much electricity as possible.
- With “modularized design” the risk during construction can be largely reduced, construction period can be shortened, improve the product quality controllability.
|
High Temperature Screw Type Parallel Compressor Unit Standard Configuration |
|||
| 1 | Parallel unit components | 4 | Oil line components |
| Strong metal frame | Oil outlet with filter barrel, with filter core | ||
| Lifting ring | Oil line ball valve | ||
| Cushion | Oil line solenoid valve | ||
| 2 | Reservoir components | Oil line sight glass | |
| 28 bar safety valve | Electrical oil flow switch | ||
| Inlet/outlet stop valve | 5 | Single compressor components | |
| Reservoir sight glass | Suction/discharge stop valve | ||
| Pipeline sight glass | Discharge one direction stop valve | ||
| Filter drier barrel, with filter core | Compressor shockwave cushion | ||
| Stop valve for filter barrel outlet | Suction filter barrel, with filter core | ||
| 3 | Discharge components | 1st degree spray cooling system | |
|
External oil separator (with sight glass) |
Oil sight glass | ||
| oil heater | |||
| Oil separator outlet stop valve | |||
| Oil temperature controller | |||
| Oil level controller | |||
![]()
![]()
Want to Know more details about this product






